Customer Service: +61 3 8470 7300
  • Homepage
  •  

    Sentryline – M® Wire Rope Barrier

Sentryline – M® Wire Rope Barrier

End of Line
Product Image
View Product Images

STANDARDS AND APPROVALS

End of Line
  • AS/NZS 3845 – Part 1 Products
  • MASH (2016) TL-3 & TL-4 tested by Holmes Solutions
  • Approved by Austroads Safety Barrier Assessment Panel (ASBAP)
  • Accepted by Waka Kotahi (NZ Transport Agency) for use on the New Zealand state highway roading network

SPECIFICATIONS

End of Line
  • Cable – 19mm 3 x 7 strand, pre-stretched by 35%
  • Cable heights (to the centre) as per drawing FX748
  • Typically Line Post footing piles are 300mm diameter x 750mm (0.05m3)
  • Length of Need is met at Transition Line Post 5 
  • Tensioned to 25kN at 20°C (Tension may vary depending on air temperature at time of installation, see chart in Product and Installation Manual)
  • Max flare, 300mm over 10m of the terminal end (offset from tangent)
  • All components are hot dip galvanised (posts are all white powder coated)
  • Concrete is 25MPa
DocLaunch Page Launch Commonon Launch