Customer Service: +61 3 8470 7300
  • Homepage
  •  New 

    Technical Note: Multiplate Culverts – Aluminium vs Steel

Technical Note: Multiplate Culverts – Aluminium vs Steel

Send to printer
End of Line

CSP Pacific’s range of corrugated metal culverts are available in both aluminium and steel. This article helps explain the key differences between the two materials to assist specifiers when selecting which product best suits requirements.

Steel Multiplate culverts feature hot dip galvanised mild steel plate walls. The layer of zinc deposited by the galvanising process offers cathodic (sacrificial) protection to steel. Once the zinc has been expended, which in normal environmental conditions in New Zealand can take 10 to 20 years, corrosion accelerates as it starts to attack the steel leading to a rusty appearance, loss of the wall thickness and, eventually, perforation. Galvanised steel culverts in New Zealand are designed using the ‘sacrificial wall thickness’ method meaning that some loss of wall thickness is acceptable without compromising the structural integrity of the structure.

Steel culverts have the following advantages over aluminium:

  • Mild steel is up to 40% stronger than aluminium plate of the same thickness. As the residual steel wall thickness  decreases, as a result of corrosion, this advantage diminishes for culverts designed for a service life longer than 25  years.
  • Bolted connections in steel plates have higher capacity than aluminium meaning for larger spans less bolts are  required.
  • Mild steel is three times stiffer than aluminium which, due to its stiffness, reduces culvert deformation during  backfilling and in service.
  • Better availability of steel plate means that lead times will normally be shorter than for aluminium.

Aluminium Multiplate and Multiplate 100+ culverts are made of marine grade 5052-H34 aluminium alloy. When in contact with an aggressive environment aluminium forms a protective layer of oxide which gives it corrosion resistance superior to steel. Unlike galvanised steel, which corrodes faster once the zinc has been expended, the rate of corrosion in aluminium does not increase over time. While aluminium culverts are also designed using the ‘sacrificial wall thickness’ method the rates of wall thickness loss are much lower than for steel (in low corrosion environments there is no loss of thickness at all).

The advantages of aluminium over galvanised steel culverts:

  • Superior durability which negates the price premium over galvanised steel for culverts when the design life is  longer than 25 years.
  • Aluminium is three times lighter than steel which leads to substantial savings in freight, handling and installation.
  • Aluminium oxides are dull grey in colour so there is no ‘rusty’ appearance in service.
  • Aluminium is cheaper than equivalent strength galvanised steel culverts designed for 50+ years of service life.

For information on the Mutiplate Structure that is right for your situation call CSP Pacific on 0800 655 200 or email To access our online culvert selection and pricing tool click here


NZ Regional Map

Auckland and Northland

Ph: +64 9 634 1239

more info


Retrofit maximises the use of existing lighting poles

5 September 2019: Security is fundamentally important across all walks of life to ensure the safety of people and ...

more >>

CSP Pacific’s MFP™ – the way of the future

5 September 2019: As Auckland City ramps up for the America's Cup in 2021 the heat is on projects such as the ...

more >>
DocLaunch Page Launch Commonon Launch
Auckland Lower Nth Island South Island