U-MAD™ Truck and Trailer Mounted Attenuator U-MAD™ Truck and Trailer Mounted Attenuators (TMAs) are designed to absorb collision energy during rear-end impacts. They prevent impacting vehicles from under riding the truck and reducing damage to the expensive equipment. U-MAD™ (TMAs) offer excellent life cycle costs, are quick and easy to refurbish and protect workers, motorists and equipment. The U-MAD™ Truck Mounted system has many flexible options in lifts, mounting systems, hydraulics, and controllers to make installation, use and maintenance as simple as possible. Advantages | | Standard 100kph or 70kph cushion cartridges available | | | Tested and approved to NCHRP 350 TL2 (70kph) and TL3 (100kph) | | | Can be mounted to truck or trailer units quickly with standard tools | | | Excellent stability in angled and offset impacts | | | Superior containment of vehicle and debris in lane | | | Quick and easy refurbishment | Specifications | U-MAD™ 100 | U-MAD™ 70 | | | Approval: TL3 100 kph | | | Cartridge length: 3.3m | | | Cartridge width: 2.3m | | | Cartridge Depth: 700mm | | | Cartridge Weight: 415kg | | | Truck weight: 8,550kg | | | Trailer length: 3.2m | | | Trailer weight: 735kg | | | Total weight trailer & unit: 1270kg | | | | Approval: TL2 70 kph | | | Cartridge length: 2m | | | Cartridge width: 2.3m | | | Cartridge depth: 700mm | | | Cartridge weight: 275kg | | | Truck weight: 8,550kg | | | Trailer length: 3.2m | | | Trailer weight: 735kg | | | Total weight trailer & unit: 1125kg | | | Hydraulics: | Standard, locking and wet | | Controllers: | Standard, lockout and outside pennant | | Mounting: | Standard, dump, flatbed, tube, quick connect and extension support structure | Standards and Acceptance The U-MADT™ 70 Truck Mounted Attenuator has been fully tested and accepted in accordance with NCHRP Report 350, Test Level 2 (70kph) The U-MAD™ 100 Truck Mounted Attenuator has been fully tested and accepted in accordance with NCHRP Report 350, Test Level 3 (100kph)
Terms & Conditions of Sale > |
