TL-4 Steel Barrier
The TL-4 Steel Barrier system (TL4 NCHRP 350 approved) is a new generation of temporary / permanent barrier system providing levels of safety in many roadwork zones previously not considered possible. It provides containment and deflection performance levels equal or better than any other system.
The barriers are easy to transport and easy to install, making the TL-4 Steel Barrier and economical barrier for most situations.
The TL-4 Steel Barrier is also available for hire. This is an ideal temporary road barrier solution that meets NCHRP 350 TL-4 Crash test Criteria. See our Barrier Hire section for more information, click here .
Advantages
| |
Approved to NCHRP 350 TL-4 |
| |
Available for hire or purchase |
| |
Deflection of 1.5 metre |
| |
Light weight: 1000m TL-4 Steel Barrier - 90 tonne, |
| |
1000m concrete-1000 tonne |
| |
Rapid deployment - up to 288 m/hr |
| |
Requires anchoring only at end of each run |
| |
May be anchored in permanent applications |
| |
TL-4 Steel Barrier is the highest performing temporary worksite barrier available |
| |
Very low exit angle following vehicle impact |
| |
Up to 144 metres (none inverted) can be transported on one truck (concrete 36m) |
| |
Radius connections – able to achieve minimum 35 metre radius |
| |
Connects directly to the Absorb 350™ temporary crash cushion |
| |
Screens available |
Specifications
| |
Galvanised steel finish |
| |
Length: 12m/unit |
| |
Height: 800mm |
| |
Width (base): 540mm |
| |
Width (top): 235mm |
| |
Weight: 1080kg/12metre section |
| |
Up to 144 metres can be moved on one truck |
| |
Up to 300 metres can be installed in one hour |
Standards and Approvals
Tested and approved to NCHRP 350, test level 4.
For a PDF document containing letters of approval for the TL-4 Steel Barrier click here. (PDF 552 KB)
Terms & Conditions of Sale >> |
© 2010 – CSP Pacific │ A Fletcher Concrete & Infrastructure Limited Business. Subject To Terms & Conditions Of Use