Water-Wall™ TL-1 Plastic Water Filled Barrier The Water-Wall™ TL-1 Barrier is a durable side protective temporary crash barrier system that can be used in many situations, from protecting the public surrounding a construction site to work-zone safety on 50kph and below roads. The Water-Wall™ TL-1 Barrier connects directly to the SLED end treatemnt which negates the need to shield or flare the end of the barrier. The Water-Wall™ Barrier is an economic and easy to install crash barrier system. The Water-Wall™ TL-1 Barrier is also available for hire. This is an ideal temporary road barrier solution that meets NCHRP 350 Test Level 1 crash test criteria. See our Hire section for more information, click here. Advantages | | Approved to NCHRP 350 TL-1 | | | Available for hire or purchase | | | Durable Polyethylene plastic | | | Double wall knuckle design prevents breakage at hinge points | | | Hinge design allows for 30° pivoting at joins | | | 200mm fill hole with plastic cap | | | Temporary Plastic Water-filled Barrier | | | Plastic water release cap at bottom | | | Suitable for impact speeds up to 50 kph | | | Fork lift slots for easy movement | | | Includes steel connecting pin allowing sections to be locked together | | | SLED End Treatment can be used to avoid having shield or flare the end of the barrier | Specifications | | NCHRP 350 Test Level 1 (TL-1) | | | Speed: 50kph or below | | | Height: 822mm | | | Width: 460mm at base | | | LightweEffective length: 1854mm pin to pin | | | Overall Length: 1960mm | | | Empty Weight: 35kg | | | FIlled Weight: 500kg | | | Fill Capacity: 465 litres | FHWA Letter of Acceptance NZTA Letter of Acceptance
Terms & Conditions of Sale > |
