Product Description Product Brand
 
 
 
Hire Products
 
 
 
 
Introduction
 
With safety top of mind for your clients, staff and the public, CSP Pacific has sourced products from around the world that are NCHRP 350 compliant and have NZTA approval for workzones. CSP Pacific have a range of products to suit temporary protection in all project situations.
 

For more information call:
David Russell, CSP Pacific Hire Manager
Freephone: 0800 655 200 (NZ only)
Ph: +64 9 275 5813
Fx: +64 9 634 4525
Mob: +64 21 503 831
Email: david.russell@csppacific.co.nz

Mario Bennett, CSP Pacific Hire Sales Engineer
Freephone: 0800 655 200 (NZ only)
Ph: +64 9 275 5813
Fx: +64 9 634 4525
Mob: +64 27 491 3256
Email: mario.bennett@csppacific.co.nz

 
CSP Pacific also have available a Portable Safety Fence and Barricade that can be used in areas where a compliant barrier is not required.
 
View Hire Products Brochure (PDF 316 KB)
 
Terms & Conditions of Hire
 
Terms & Conditions of Hire (PDF 29KB)
 
NCHRP 350 approved barriers
 
TL-1 Plastic Water Filled Barrier
 
The TL-1 Plastic Water Filled Barrier is a durable, water-filled, side protective, crash barrier system that can be used in many situations, from protecting the public surrounding a construction site to work-zone safety on 50kph roads.
 
It is simple and easy to install with no special installation requirements.
 
It is the only Test Level 1 plastic crash barrier available in New Zealand.
 
NB: Barriers must be filled with water to comply to NCHRP350 TL-1.
 
Click here for more information.
Click here for project.
Click here for latest FHWA approval. (PDF 179KB)
 
ArmorZone™ TL-2 Plastic Barrier
 
The ArmorZone™ TL-2 Plastic Barrier is made up of plastic units that when joined together, using a steel connector and filled with water, provide positive work zone barrier protection to temporary construction sites and other miscellaneous roadside activities.
 
ArmorZone™ TL-2 Plastic Water Filled Barrier is the world’s first 100% polyethylene water filled barrier (no steel reinforcement) to have been judged to have satisfied the evaluation criteria of NCHRP 350 Test Level 2 (TL-2). 
 
 
NB: Barriers must be filled with water to comply to NCHRP350 TL-2.
 
Click here for more information.
Click here for latest NZTA approval. (PDF 364KB)
 
Nu-Guard 31™ Steel Guardrail System
 
With smaller footprint, lighter weight and has no requirement for a blockout, the Nu-Guard 31™ steel post guardrail system is simple and quick to install.
 
Nu-Guard 31™ is a cost effect solution for long term temporary work-zone protection and at the end of the project can be used for the projects permanent guardrailing requirements.
 
Nu-Guard 31™ uses NUCOR™ high tensile steel posts which enable fast installation and easily removed to be reused in another location.
 
Click here for more information.
Click here for latest FHWA approval. (PDF 446KB)
 
 BarrierGuard 800
 
BarrierGuard 800 (TL-3 and TL-4 NCHRP 350 approved) is a temporary barrier system that provides a high level of safety in roadwork zones. It provides containment and deflection performance levels equal or better than any other system
 
The barriers are easy to transport and easy to install, making the BarrierGuard 800 an economical barrier for most situations.
 
NB: Barriers must be pinned at each end of a run to comply to NCHRP350 TL-3 or 4.
 
Click here for more information.
Click here for project.
Click here for latest FHWA approval. (PDF 2.29MB)
 
ABSORB 350™ Crash Cushion
 
The ABSORB 350™ Crash Cushion is a water-filled, non-re-directive, gating crash cushion that is approved to NCHRP 350 Test Level 1, 2 and 3 criteria. It attaches to portable, permanent and moveable concrete and steel barrier.
 
The ABSORB 350™ Crash Cushion is the most accepted premier product of its type available.
 
NB: Crash cushions must be filled with water to comply to NCHRP350.
 
Click here for more information.
Click here for project.
Click here for latest FHWA approval. (PDF 203KB)
 
Universal TAU-II™ Crash Cushion
 
The TAU-II™ is a fully re-directive crash cushion used at locations where the most demanding performance is a necessity.
 
The TAU-II™ system is ideally suited to protect work-zone roadway hazards such as the ends of portable, permanent and moveable concrete and steel barrier.
 
The TAU-II™ can be provided in lengths to suit 50kph to 100kph impact speeds and has a low life cycle cost being easily repaired after an impact.
 
Click here for more information.
Click here for latest FHWA approval. (PDF 2.29MB)
 
Raptor™ Utility Pole and Tree Protector
 
The Raptor™ is the world's first safety device designed to reduce the severity of errant vehicle impacts with utility poles or trees.
 
The unique Raptor™ is fully recyclable and is a highly compact alternative solution to a full scale crash cushion, especially at sites where space is limited.
 
It offers exceptional vehicle control and energy absorbing capabilities in head-on impacts (where the energy is absorbed by internal plastic cartridges) and in side-on, angled impacts where the vehicle is redirected safely.
 
The Raptor™ was judged to have successfully met all applicable evaluation criteria for NCHRP 350 TL-1 for a re-directive, non-gating crash cushion.
 
Click here for more information.
Click here for crash test results.
Click here for Raptor Impactment Absorption information.
 
Safety Barricades
 
Portable Safety Fence and Barricade
 
Portable Barricade system with concrete filled foot.
 
Portable Barricade system with plastic swivel foot.
The Portable Safety Fence and Barricade is a portable light weight barricade that can be used in situations where a compliant barricade is not required.
 
Uses can include:
 
  • Crowd control barricade
  • Pedestrian barricade
  • Traffic barricade
  • Safety fence
Click here (PDF 385KB) for more information.
 
CSP Pacific can take care of everything from site assessment to delivery and installation of hire barriers.
 
Need something that we don’t stock? Let us know and we can source the product for you.
 
 
Contact Details
 
For more information call:
David Russell, CSP Pacific Hire Manager
Freephone: 0800 655 200 (NZ only)
Ph: +64 9 275 5813
Fx: +64 9 634 4525
Mob: +64 21 503 831
Email: david.russell@csppacific.co.nz
 
Mario Bennett, CSP Pacific Hire Sales Engineer
Freephone: 0800 655 200 (NZ only)
Ph: +64 9 275 5813
Fx: +64 9 634 4525
Mob: +64 27 491 3256
Email: mario.bennett@csppacific.co.nz
 
Contact Us
 
List All Locations >>
 
News
> An Armorwire solution for bridge structures
more >>
> Technical note: NZTA approves Nu-Guard 31™ transition to rigid barrier
more >>
> Technical note: AS/NZS 2041 for Multiplate Structures has been updated
more >>
> A new role …..
more >>
View all News Releases >>
 
 
 
 
Northland Auckland Central Nth Island Lower Nth Island Sth Island