In this issue: August 2015
  • NEW - VGAN Aluminium Parapet installed in a New Zealand first, more >
  • Huge volumes of safety barrier go into Causeway Upgrade, more >
  • Nu-Guard® 31 steel guardrail - permanent barrier perfect for a temporary situation, more >
  • Oclyte™ Lighting Columns - proud to be New Zealand made, more >
  • New Zealand’s first Super•Cor® Arch culvert takes shape, more >
  • Product Information Update - Brifen Wire Rope Safety Barrier, more >
  • Technical Talk : X-350 Terminal End - ensuring the gap between slider and post is correct, more >
To unsubscribe click here
 

In a New Zealand first, CSP Pacific’s VGAN Aluminum Bridge Parapet System has been chosen for use on a new railway bridge on Broderick Road in Johnsonville, Wellington. The VGAN was chosen, not only because it is a fully compliant TL-4 system, but also because of its good looks!

Read more >

For more information about CSP Pacific’s VGAN Aluminum Bridge parapet click here or
Email: cspcustomerservice@csppacific.co.nz or
Phone CSP Pacific on 0800 655 200

 

The completion of the Western Ring Route in Auckland, is one of the largest motorway projects ever undertaken in New Zealand. There are many pieces to the complex puzzle that makes up this project including the SH16 Causeway Upgrade project, which will feature many kilometres of road safety barrier from CSP Pacific.

Read more >

For more information about CSP Pacific’s Nu-Guard® 31 Guardrail System click here or
Email: cspcustomerservice@csppacific.co.nz or
Phone CSP Pacific on 0800 655 200

 

The widening of one of the busiest sections of motorway in the country to create a new fourth northbound lane right next to the main rail line south was never going to be an easy task. Keeping traffic flowing with minimal disruption while allowing room for main contractor Fulton Hogan to work on road widening was the key factor when choosing the slim line profile of CSP Pacific’s Nu-Guard® 31 Steel Post Guardrail system for temporary traffic management for the duration of the project.

Read more >

For more information about CSP Pacific’s Nu-Guard® 31 Guardrail click here.

For more information about CSP Pacific’s Oclyte™ Streetlight Columns click here or
Email: cspcustomerservice@csppacific.co.nz or
Phone CSP Pacific on 0800 655 200

 

The Oclyte™ column range has been manufactured in CSP Pacific’s ISO 9001 accredited manufacturing plant in Auckland since 1974. CSP Pacific’s production and purchasing efficiency provides a very competitive manufacturing process for Oclyte™ columns compared to ‘cheap’ overseas imports. Local manufacture also provides quality assurance of both materials and fabrication of the column.

Read more >

For more information about CSP Pacific’s Oclyte™ Streetlight Columns click here or
Email: cspcustomerservice@csppacific.co.nz or
Phone CSP Pacific on 0800 655 200

 

New Zealand’s first Super•Cor® Arch is being used as a culvert across Whakaruatapu Stream near Dannevirke on SH2 and replaces the existing level viaduct-style bridge built in 1927. Stringfellows Contracts and subcontractor Morris & Bailey have been working on construction of the new culvert since April with the help and support of CSP Pacific.

Read more >

For more information about CSP Pacific’s SuperCor click here or
Email: cspcustomerservice@csppacific.co.nz or
Phone CSP Pacific on 0800 655 200

 

Product information for the Brifen Wire Rope Safety Barrier has recently been updated to bring it in line with NCHRP350 TL-4 specifications and New Zealand Transport Agency acceptance.

The Brifen Wire Rope Safety Barrier, used in New Zealand pre 2013, has been superseded with the NCHRP 350 TL-4 version which is now reflected in all of CSP Pacific’s literature. CSP Pacific still supports the maintenance of older systems and can be contacted for site-specific repairs.

For more information on CSP Pacific’s Brifen Wire Rope Safety Barrier click here or
Email: cspcustomerservice@csppacific.co.nz or
Phone CSP Pacific on 0800 655 200

 

When installing the X-350 Terminal End ensure there is a 25mm gap between the angle bar and the slider. The purpose of the gap is to avoid excessive overlaps between guardrails #1 and #2 on the terminal end.

Read more >

For more information about CSP Pacific’s X-350 Terminal End  click here or
Email: cspcustomerservice@csppacific.co.nz or
Phone CSP Pacific on 0800 655 200